Page 1 of 2

Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.10.30 (17:29)
by james_S
-Put one way panel on a blank map (facing up -so it can be stood on)
-Press 'page down' on your keyboard which brings up the map data- you'll see that its all zeros apart from one short sequence of numbers ending in a 6
-Change that 6 to either 1 or 3 or 5 or 7 (which represent the diagonal directions -but of course are not in the options in Editor). (0, 2, 4, 6 are the ones that are)
-Press 'page up' (but make sure you click with your mouse outside the text box first otherwise it just takes you the top of the text). And you'll be back to your map with a diagonal panel sitting there.
-Now you can copy to make many panels and rotate them as you wish and they will stay diagonal.

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.10.30 (19:04)
by M4xwell
Thanks a lot man! Now I can make a few levels/N-Arts from this... (coming soon :3)

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.10.30 (19:15)
by M4xwell
james_S wrote:Save this on your computer, Just build your maps on top of this (i.e load this code into editor), copy and delete the panels to get as many panels facing different ways as you desire!
Is this normal when you go and edit the map?
Image
(the 'X's particularly)

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.10.30 (19:18)
by EddyMataGallos
I think its better to actually understand how to do it rather than just copy the code, if you guys want to know just take a look at this sidke's post and Meta's reply:
http://forum.droni.es/viewtopic.php?f=67&t=9788
Playing around with oneways code will give you enough dexterity to do it on your own.

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.10.30 (20:00)
by james_S
Eddy, yea I thought it was interesting how it all worked, I mentioned how to do it in the user levels thread briefly. But this is so all the N2 mappers can have access to it!

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.10.30 (20:51)
by EddyMataGallos
james_S wrote:Eddy, yea I thought it was interesting how it all worked, I mentioned how to do it in the user levels thread briefly. But this is so all the N2 mappers can have access to it!
Yeah you are right there, this way its more accesible to everybody ;)

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.02 (07:36)
by EddyMatoGallos
Btw sorry for taking your name Eddy. It was meant to be a one time joke until I forgot my other password...xD So stuff it I'm keeping this name. Everyone knows the real one has the higher score :P

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.02 (07:53)
by alsojp27ace
EddyMatoGallos wrote:Btw sorry for taking your name Eddy. It was meant to be a one time joke until I forgot my other password...xD So stuff it I'm keeping this name. Everyone knows the real one has the higher score :P
This is going to get confusing

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.02 (13:01)
by _danielr_
alsojp27ace wrote:This is going to get confusing
Definitely. I keep confusing you with that jp27ace guy.
He is way cooler, no offence. ;)

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.02 (18:48)
by james_S
EddyMatoGallos wrote:Btw sorry for taking your name Eddy. It was meant to be a one time joke until I forgot my other password...xD So stuff it I'm keeping this name. Everyone knows the real one has the higher score :P

I don't like it. Annnd this is the wrong thread to talk -this is supposed to be just a tutorial.

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.02 (21:32)
by EddyMataGallos
EddyMatoGallos wrote:Btw sorry for taking your name Eddy. It was meant to be a one time joke until I forgot my other password...xD So stuff it I'm keeping this name. Everyone knows the real one has the higher score :P
You are keeping this name? Is this part of the joke or what? A one time joke is fun, several times is trolling, but keeping it forever is just being an *******.

I honestly don't see the benefits for you, and its all disadvantages for me, just create another frigging account jeez. Its not like you have any 0ths that you are going to lose or anything, not going to lose anything by chaging account.

Its just I don't get the point of keeping that name. Forgot password? Lol what a poor excuse, one would have just created a new account with a similar name or just adding a "NEW" or "2" at the end, but not plagiarize another user's name. There's just no point, theres no excuse.

"Everyone knows...." You have to realize that I don't play all levels that you play, so in those levels Im sure most people will think its me, take into account the names are so similar and most people don't read letter by letter, if they know me then they will just see it and think "ok thats Eddy". And considering how I hate submitting non-0th scores you can already guess how much that annoys me. And what about the "RATE OR DIE" maps? Damn man are you kidding?

And even plagiarizing NUMA maps, damn is there ANY ethic rule you have not broken by now? Theres just nothing good I can find about you at the moment, and thats serious for an optimistic like me.

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.02 (23:07)
by _danielr_
Seriously, MatO, what Eddy just said. Just ditch your name, and create a new account. It's not hard AT ALL.

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.02 (23:09)
by M4xwell
_danielr_ wrote:Seriously, MatO, what Eddy just said. Just ditch your name, and create a new account. It's not hard AT ALL.
Listen to this. And don't make other accounts with different active names on N, because that's unbearable fucked-up. Stop acting like an arsehole and fix your shit before it gets worse.

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.02 (23:50)
by thrasher26
EddyMatoGallos wrote:Btw sorry for taking your name Eddy. It was meant to be a one time joke until I forgot my other password...xD So stuff it I'm keeping this name. Everyone knows the real one has the higher score :P
Please....
Kill Yourself
http://www.youtube.com/watch?v=WkOgwAvCdt4

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.03 (01:26)
by _danielr_
thrasher26 wrote:Please....
Kill Yourself
Ohhh-kayyyy. I think he got the memo. Let's not go too far now...

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.03 (01:35)
by thrasher26
_danielr_ wrote:
thrasher26 wrote:Please....
Kill Yourself
Ohhh-kayyyy. I think he got the memo. Let's not go too far now...

Keep calm guy!
it's just a song!

Memo? lol. What's that?

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.03 (02:32)
by james_S
I really wanted to make a joke map mentioning the Eminem lyric: I'm the real Eddy yes Im the real Eddy, all the other Eddys are just imitating.. So wont the real Eddy Please stand up Please stand up Please stand up? -But its not funny if its just One muppet doing something unethical.

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.03 (04:12)
by M4xwell
james_S wrote:I really wanted to make a joke map mentioning the Eminem lyric: Cause he's the real Eddy yes he's the real Eddy, all the other Eddys are just imitating.. So wont the real Eddy Please stand up Please stand up Please stand up? -But its not funny if its just One muppet doing something unethical.


EDIT: just realised people have to sign up to view that map code eh -I wonder if the moderator can make it all visible ehm.
Now, in the User Levels, there's someone named 'James Smith' which made me laugh because it sounded partially to you.

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.03 (13:52)
by james_S
Ehm I edited instructions cause I'm not sure what happened :s -I seem to remember trying to reflect and rotate one diagonal panel and it changed back to being horizontal/vertical, but it doesn't :s so you don't need all 4 diagonal directions in the code. sorry

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.04 (23:14)
by thejumper£#!
Ok, so, i'm going to register:
thejumper001
thejumper002
thejumper003
***
***
"It's a dirty job, but somejumper's gotta do it."
***
***
thejumper997
thejumper999
thejumper999

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.04 (23:36)
by james_S
lolol Someone might take Dajumpah741

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.04 (23:53)
by M4xwell
james_S wrote:lolol Someone might take Dajumpah741
Stop trying to ruin his mojo before I take James_R and James_T.

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.13 (13:16)
by thejumper£#!
There is a way to put a diagonal panel in a map that I have already created?

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.13 (14:39)
by M4xwell
thejumper£#! wrote:There is a way to put a diagonal panel in a map that I have already created?
Yes. First, add a one one-way platform into it AFTER you create your map. (so, in the end of the map, add a random one-way platform)

Once you do this, save and go back on the map. Go to your map data.

You will see this if you search long enough (most likely in the end of the code)
10a4436
^ That code is the code of a one-way platform. Change the final number '6' into an odd number in order to be diagonal, even numbers will made it the normal cardinal directions.

Re: Map code for DIAGONAL ONE WAY PANELS

Posted: 2013.11.13 (14:50)
by thejumper£#!
I have created a map, I added one horizontal panel (w), but "10a4436" is not in the code.